How do I fill these gaps in the sliding patio doors??




All my sliding doors have these gaps at the bottom that let air and pests in. How do I fill these correctly and permanently? They're about 1 to 1.5 inches long on both sides of the door. Ive put a temporary adhesive weather strip in place for now but need a perm solution please!

Suggested Project Book
Related Discussions
How to get rid of mice?

We seem to have some unwelcome Mickeys and Minnies in our house. What is the best way to get rid of them?
How to remove popcorn ceiling with asbestos?

I want to remove my popcorn ceiling, but it has asbestos in it. How do I go about this safely?
How to caulk baseboard gaps?

How do I fill gaps at baseboard, should I caulk? If so, does anyone know how to caulk baseboards?
How to fix squeaky hardwood floors?

How do I fix squeaky hardwood floors?
How do I fill in barn door gap?

I put up a barn door and there is about an inch gap from the door to the wall/trim in both sides. How can I fill this in so you cant see into the room? Should I add s... See more
We are looking for an energy efficient sliding patio door pet panel. I've looked at the Endura Flap by Patio Pacific.

Anyone have experience with this? Our door is Anderson/wood.
There is a gasket you could get that will stick on there take a picture and take it to Home Depot and show a associate what you need they will help you
DIY stores will have gasket to cover this area, if not contact the manufacturer.
The manufacturer may have a fix for this, otherwise, check in your home improvement store for a gasket.
The Draft Sealer is a 3" wide, 1/16" thick heavy duty rubber weather seal that has a peel back, self-adhesive strip. Use it to seal the gap between your sliding door and the fixed (non-sliding) panel. When you are using a Patio Pet Door/Insert, the sliding door does not seal with the fixed panel. This creates a gap that bugs and drafts can come through but not sure if this is the right item for your situation but worth checking out.
That's a strange thing for a manufacturer to do. Do you know who made them? If so, contact them and ask them what fix they have for that.
You would need to contact the manufacturer tofix for this. Or you can visit your home improvement store for a gasket.
Here are some examples of the weather stripping for sliding patio doors that others have already suggested:
just add a weather seal gasket on the bottom you can find them at any hardware store
Hi Eric: You can, most likely, get some pieces of vinyl like gutter tension guard https://www.homedepot.com/p/Amerimax-Home-Products-Solid-3-ft-White-Vinyl-Surface-Tension-Gutter-Guard-85323/303499050, or a square of vinyl tile to match the area, cut it about an inch higher and wider than the opening, going down to the base, use some epoxy glue and glue it onto the opening. That should fix it. Maybe not the prettiest, but probably the fastest, cheapest an easiest :)
Good luck
Home Depot and Lowes sells self adhesive gaskets sealers in the door section. They come in different widths so measure the gap. It is very easy to install.
Hello, you should be able to find a good fitting gasket at you local home improvement store, bring the picture with you and see what they can do for you.
i would for sure contact manufactures because that shouldn't be there